2025 Etnyre Asphalt Distributors Base

2025 Etnyre Asphalt Distributors Base

Swipe to View More

  • Year 2025
  • Make Etnyre
  • Model Asphalt Distributors
2025 Etnyre Asphalt Distributors Base

2025 Etnyre Asphalt Distributors Base

2025 Etnyre Asphalt Distributors

Safely Transport and Spray Asphalt with Etnyre Asphalt Distributors

Asphalt distributors are an essential part of road paving for road maintenance crews. Asphalt distributors are uniquely designed to carefully spray between 1,000 and 4,500 gallons of liquid asphalt onto any roadway or lot surface. You’ll often find contractors using asphalt distributors when managing sealcoating, chip sealing, emulsion spraying, and various other applications. And with Etnyre’s Black-Topper® asphalt distributors, you can ensure you’re getting the best road paving equipment available.

Why Choose Asphalt?

Asphalt is the clear choice for most contractors when it comes to repairing or maintaining roadways. Asphalt is an incredibly versatile material with exceptional quality and longevity. Some of asphalt’s best features include:

Quick & Easy – With help from asphalt distributors and other road equipment, asphalt can be applied quickly to any surface. Additionally, asphalt is quick to dry, requiring minimal road closures during or after asphalt application.

Recyclable – Asphalt is an easily recyclable material. Often, most roadway surfaces contractors pave with previously used asphalt. Recycled asphalt also cuts down on the cost of asphalt production.

Safety – Asphalt pavement offers high skid resistance for drivers. That skid resistance can go further when you use asphalt in conjunction with the standard chip seal paving process. Asphalt pavement also allows for better visibility of road markings in near any weather condition.

Longevity – Asphalt is a durable and long-lasting material. If applied correctly, asphalt surfaces can withstand most heavy traffic, extreme temperatures, severe weather and chemical spillage. With periodic maintenance, asphalt roadways and lots can last a lifetime.

Features may include:

Black-Topper® Asphalt Distributors

If searching for high-quality, custom-built road maintenance equipment, contractors throughout the U.S. rely on Etnyre. And with our Black-Topper® asphalt distributors, we set the bar on asphalt application accuracy and quality. Our units’ streamlined design minimizes maintenance while enhancing performance and productivity. Like all Etnyre equipment, we build every unit to order, so you get the features and output you need to be successful. Some of the Black-Topper’s® best features include:

  • One person operation with controls from the truck cab or near the rear of the distributor
  • Electronic asphalt pump speed controls for more precise control
  • Custom tank sizes, with capacity options between 1,000 and 4,500 gallons
  • Full circulating 12-foot spray bar with folding wings electric-hydraulic shifting
  • Balanced, dual feed asphalt flow for uniform application across the full bar
  • Meets all federal regulations for hot products
Contact Us

When selecting the best equipment for asphalt application and general road maintenance, ensure the highest levels of simplicity and accuracy with Etnyre’s Black-Topper® asphalt distributors. To learn more about our asphalt distributors or other road paving equipment, contact Etnyre today at 815-732-2116. Also, we are located at 1333 South Daysville Rd, Oregon, IL 61061. Etnyre is headquartered in Illinois, serving clients throughout the United States.

Motor

Motor Type : Piston motor with gearbox. 1.53 cubic inch per revolution displacement, direct coupled to the asphalt pump. Entire transmission unit shall be capable of operating speeds up to 2800 RPM. Hydraulic oil may reach temperature up to 200 degrees without damage to the unit. Unit shall have internal valving, and shall be fitted with relief valve and high oil temperature signal in cab

Drivetrain

Transmission Hydrostatic

Operational

Operating Conditions HEATING SYSTEM: Flues: (1) with (LPG) liquid petroleum gas burner, with minimum of 1,000,000 BTU per hour per burner capacity. With pressure regulator, valves, piping, and 52 gallon frame mounted tank to be furnished.

Hydraulics

Oil Filter A 10 micron, replaceable cartridge type filter with vacuum gauge shall be located in the line between oil reservoir and hydrostatic pump.
Pump Type Infinitely variable displacement pump with a minimum displacement of 3.1 cubic inches per revolution, axial piston type. Electronic stroker control. | Positive displacement rotary gear type. 4 1/2" suction x 4" discharge

Features

Features . Crankshaft Take-Off: Hydrostatic pump driven by crankshaft take off; chassis must be equipped to accept crankshaft drive. | Bitumen Pump Capacity: Minimum of 400 gallons per minute. | SPRAY BAR: To consist of 8' center section with (2) folding wing sections. Electric-air on-off in 1' increments, cab controlled. Electric-hydraulic spray bar shifting, lifting and wing folding, cab controlled. Nozzles to be spaced on 4" centers on spray bar and shall have an individual valve for each spray nozzle. Each nozzle valve to have flip lever control so spray width can be adjusted, and allows individual valves to be disconnected without the use of tools or pulling pins. Right and left side wings (bar extensions) to relieve fore and aft. Pin replacement required when bar relieves. Bar to adjust for positive or negative crown and also adjustment for pitch of bar to aim nozzle valves rearward. Sections to be interchangeable, right or left side. | AIR CONTROLS: Driver Operated Cab Control. Distributor shall be equipped with air controls. Air for the controls shall be obtained from the air system on the truck chassis. The Distributor air system shall include its own air reservoir (using of truck chassis reservoir not acceptable) with check valve set at 80 pounds to prevent loss of air on truck chassis brakes in case lines are ruptured. System shall have its own air line oiling device and controls shall be electric, located in cab convenient to operator | Tool Box: All steel box with aluminum door, of sufficient size to store all necessary tools shall be furnished at side of the tank. Must have hinged door at side with flush-type lock. Door at top not acceptable | Fenders: Full dual flanged fenders (.080" aluminum) with rubber flaps. Use of skirting and flaps as a substitute for fenders not acceptable. | Computer with in-cab operator controls which include: Computer controlled switches for ten (minimum) preset application rates. Distance/volume reset switch. Application rate adjustment switch. Display select switch. | Radar type sensor to pickup ground speed. | System control of 4-way asphalt valve.

Warranty

Warranty Minimum 12 month warranty of Distributor components. With the bid shall be included manufacturer’s descriptive literature and specifications on unit being bid, and a list of any exceptions to these specifications. Bidder will supply parts manual and complete operating instruction manual with bid if requested. Bid shall include mounting on customer’s chassis at factory and instruction of operator on maintenance and operation at factory

Product Photography